User guide
How to use QAudioStudio
A full voiceover studio on your Mac. Record, read your script on the Teleprompter, edit the take, and convert it. The Help button opens this page, qcreativelabs.com/qaudiostudio/how-to/. ⌘? (Help › QAudioStudio Help) opens it too. Help › Quick Tips is a one-page summary inside the app.
It still converts audio to MP3. Start with the Teleprompter, or the short voiceover routine.
Start here
One path through a voiceover, using tools that are in the app today.
A voiceover, start to finish
- Paste your script into the Teleprompter.
- Check the level on the meter, then press R.
- Fumble a line? Press X (or Delete This Take), then the space bar to carry on.
- In Edit, turn on Clean up noise and Smooth voice, and Normalize to −16 LUFS.
- Click Save Finished WAV, or go to Convert, where the recording is already waiting, and make your MP3.
Teleprompter
Your script, on the Record tab or in its own window on a second screen.
Teleprompter
Click Teleprompter at the top of the right column on the Record tab. The script is saved with the project. One you add before recording joins the new recording. After New Project, Use the Same Script Again brings it back in one click.
Get a script in
- Paste. Copy the script from anywhere (⌘C) and click Paste.
- Open File… or drop a file anywhere on the app. PDF, Word (.docx and .doc), RTF, OpenDocument (.odt), or plain text (.txt and .md). A Pages file has to be exported to PDF or Word first.
- Type it. The empty Teleprompter says "or type it here".
Type or fix it
The pencil button opens the script so you can change it. Done saves it (⌘↩). Cancel leaves it as it was (Esc).
Read while you record
An amber reading line shows where to keep your eyes. Words you have already read turn grey. The top shows the word count and about how long the script takes to read.
- Text size. A− and A+.
- Scroll. Manual: you scroll with the trackpad, or ↑ and ↓. Auto: it moves by itself while you record, at the Speed you choose, in words per minute. ← and → change that speed. You can always scroll by hand to jump ahead or back.
A second screen
The pop-out button opens the Teleprompter in its own window. Drag that window to a second screen, where it can go full screen.
The window shows that you are recording, and the time. It has its own text size. The space bar and R work there too. ⌘+ and ⌘− change the text size in that window. Back to Record Tab, or the red button, puts it back.
Record
Your voice, full system audio, or one app, with the level in front of you.
Record
Choose a microphone, interface, or mixer. System default follows the Mac's Sound settings. Choose a device when this app should use that device. If the device has several inputs, pick the input.
System audio or one app. Record full system audio (All Mac sound), or the audio from one specific app. Choose Another App… adds any app, even before it is open, and recording connects when that app plays. Apps that are open and playing are marked. If an app sends silence, including some streaming services that block recording, the app tells you. This needs macOS 14.2 or later. A microphone or mixer records on macOS 12 or later.
- Mono or stereo. Mono is one channel, plays in both ears, and the file is half the size. It suits a voice. With a microphone, stereo is the same voice in both channels. With system audio or one app, stereo is real left and right.
- Record as WAV. 48 kHz / 24-bit, or 44.1 kHz / 16-bit for CD. When you record more into a project, these follow that project.
- Levels. The LED meter moves before you record. Green is a good level, amber is loud, and CLIP lights if it is too loud. A tip says Good level, Too quiet, or Too loud. Set the input volume. The app also estimates how many hours of room are left on the disk.
Press R to record. The line above says whether this starts a new project or records into the open project at the cursor. Anything after the cursor moves along to make room. Nothing is recorded over.
- The space bar stops and starts recording. Stop, then press space again, and it carries on at once, with nothing played first. When the cursor is not at the end, space listens from there.
- Pause keeps the take ready. Stop (S) finishes it. Add marker (M) drops a chapter marker.
- Optional: a 3-2-1 count-in, and Play the 3 seconds before it first when you continue a recording.
- The recording is written to disk as you go. Quitting while you are recording asks first, and everything recorded so far is kept.
The project's waveform is on this tab. Click to place the cursor, drag to select, and zoom with ⌘+, ⌘−, ⌘0, the slider, or a pinch.
- Listen, Undo, Redo, Delete (⌫), and cut, copy, and paste (⌘X ⌘C ⌘V).
- Delete Last Take (X) removes the part you just recorded. Press it again for the take before that. While you are recording it says Delete This Take: recording stops, that take goes, and the cursor waits where the take began.
- Retake takes the selected part out and leaves the cursor there, ready to record it again. To the end jumps to the end.
Save Finished WAV makes a clean WAV of what you hear, with the cuts gone. Clean up noise, Smooth voice, and Normalize are included when they are on. The file goes in a Finished folder and shows in Finder. Saving again makes a new copy. Nothing is overwritten.
When you stop, the recording appears in the Convert list, ticked and ready. That row follows later edits.
Projects
One recording, or one imported file, plus everything you did to it.
Projects
Every recording is a project from the moment you press Record. Opening an MP3, WAV, M4A, or a video's sound makes a project too. The app makes a full-quality WAV copy to work on. The file you opened is never changed.
There is no Save button. Every change is saved within about half a second. Close the app and come back, and it picks up where you left off. Start Fresh appears briefly when you reopen a project, if you would rather begin again without its edits. Undo brings them back.
The project button at the top of the window has New Project (⌘N), the current project with a tick, and up to eight recent ones. Click one to switch. The pencil renames the current project. All Projects (⌘L) is the full list: Open, Rename, Show in Finder, Save a Copy with Audio, Archive, and Delete. Archive tidies the list without deleting.
The list on the Record tab shows every project with its length, size, date, chapters, and whether it is a recording or an import. Click the name to rename it. A recording's sound file is renamed too. Open switches to it. Show in Finder shows the raw sound file, which still contains anything you cut. Use Save Finished WAV for the clean version. The remove button moves a project to the Trash, and Undo brings it back.
Order is Last worked on, Newest, Oldest, Name, or My order. Drag a project by its grip. Your order is remembered.
New Project clears the screen. The project you were on stays in the list, and Undo brings it straight back.
After New Project, the waveform is empty and the project button says no project is open. Press Record when you are ready. Earlier projects stay in the list on the right.
Edit
Your original sound is never changed. Edits are a list, so Undo always works, including after you close the app.
Edit
A recording opens here when you stop. You can also use Open…, drop a file on the window, click a file's waveform button in Convert, or pick a project. Audio and video both work. For a video, you edit its sound. The picture is not changed, and Convert saves the sound as an audio file.
The bar at the top shows the file and the project, and that the edit is non-destructive. Record more goes back to the Record tab and keeps recording into this project, at the cursor or at the end. Clear, Open…, and Send to Convert are on that bar too.
The overview shows the whole file. The big waveform shows the part you are working on. Click to place the playhead. Drag to select. Zoom with the magnifiers or the slider, ⌘+ and ⌘−, a pinch, or ⌘ and scroll. Selection zooms to what is selected. Whole file shows everything. Height, from 1× to 8×, makes quiet parts easier to see.
Space plays and pauses. ← and → jump 5 seconds. Loop (L) repeats the selection. The meters show left, right, and how much Smooth voice is working.
- Undo and Redo (⌘Z / ⇧⌘Z). The history survives closing the app.
- Delete (⌫) removes the selection. Trim (T) keeps only the selection.
- Split (S) marks where a new file starts. One recording becomes several parts in Convert.
- New File makes a new WAV, and a new project, from just the selection, as you hear it.
- Cut, copy, and paste (⌘X ⌘C ⌘V) move or repeat a part.
- Mute, Fade In, and Fade Out silence a part, or fade it.
- Marker adds a chapter marker at the playhead.
Right-click the waveform for the same actions. The Edits list, at the bottom right, is a plain-language history of what you have done.
Beside the waveform: Voice, Loudness, Chapters, and Transcript. A dot on Voice means Clean up noise or Smooth voice is on.
Send to Convert (⌘↩) puts the edited version in the Convert list, one row per part if you used Split, with a summary such as "Edited · 2 cuts · fades · 3 chapters". Recordings are added by themselves when you stop, and their rows follow every edit. Send to Convert also brings back a row you removed.
Voice
Clean up noise and Smooth voice can each be switched off and on while the audio plays. NOISE and SMOOTH sit by the play button, so you can hear the difference. Your sound is not changed until you save or convert. Save Finished WAV, New File, and Send to Convert include them when they are on.
Clean up noise is Off, Light, Medium, or Strong. It uses the Mac's Voice Isolation to lower steady background noise: hiss, hum, a computer fan, air conditioning. That is about 6, 12, or 20 dB less noise, and the voice stays as it was. Strong keeps a little room sound, so pauses do not go dead. It cannot remove a sudden sound, such as a dog or a door. Needs macOS 13 or later.
Smooth voice is a compressor. Quiet words come up and loud ones come down. Light, Medium, and Strong are set for this recording's level. Custom has four knobs: Threshold, Ratio, Attack, and Release. Auto sets the knobs for you. The meter shows the sound (AUDIO) and how much it is being turned down (COMPRESSION). Aim for about 3 to 6 dB. Evenness scores how even the voice is. Apply permanently makes Smooth voice part of the project's sound. Undo brings the original back.
The Smooth voice window (⌥⌘V) can be Full size, with the knobs, or a Strip with the switch and the lights. Hide puts the window away, and it keeps working.
Loudness
Normalize raises or lowers the whole file to a standard level. It shows the level now and the change.
- −16 LUFS for podcasts. This is the recommended target.
- −14 LUFS for streaming music.
- −19 LUFS for mono podcasts.
- −23 LUFS for broadcast.
Use the limiter for a quiet recording. It lets the file reach the target by holding the loudest moments, so nothing distorts. With the limiter off, the level stops short of distorting and the panel shows how close it got.
Also even out every file in Convert measures and levels every file you convert, so episodes play at the same volume.
Chapters
Markers you add while recording with M, or with the Marker tool, become chapters. Name them, click one to jump there, or remove one.
Paste timestamps from a list such as "0:00 Intro, 1:35 Welcome" and the markers are made for you. Copy as list copies them, ready for a YouTube description.
Chapters go into the M4A files you convert. An MP3 can have them saved straight into it, with Save chapters into this MP3.
Transcript
The speech in your recording, as text, made on your Mac. Nothing is uploaded. Choose Edit, Transcript, Make the Transcript. A 2-hour recording takes about 3 minutes. Needs macOS 26 or later. The language model downloads once, the first time. Choose the language before you start.
- Follow along. The word you hear lights up. Click any word to jump there.
- Fix it like a document. Click into the text, type, then press Return. Each word keeps its place in the sound. Esc cancels that typing. Underlined words are ones the Mac was not sure of.
- It follows your edits. Cut a part of the sound and its words drop out. Undo brings them back. If you record more later, Add It transcribes just the new part.
- Save as Text writes a plain text file. Save Captions writes an .srt file for YouTube and other video sites. The captions follow the edited recording, in short lines that are easy to read.
The more menu has Copy All the Text, Make It Again, and Delete the Transcript. The transcript is saved with the project.
Convert
New files, in the format you need. Your files are never changed. It still converts audio to MP3.
Convert
Drop files on the window or the Dock icon, click Browse files, or press ⌘O. It opens WAV, AIFF, FLAC, MP3, M4A, MP4, MOV, and more. For a video, its sound is converted. Your recordings appear here by themselves, already edited the way you left them.
The list is remembered between sessions. A file that has been moved shows as Missing. An already-compressed file, such as MP3 or AAC, gets a gentle warning that converting again can lose a little quality.
Each row has two names. The first line is the file as it is, and it never changes. The amber line is the new file Convert will make. It follows Save as, and you can click the name to rename the new file. Then the title and track number, the details or edit summary, the length, the size, and the status. Make it a project turns an imported file into a project.
Buttons on a row: Show in Finder, Edit, Tags, and remove. Undo brings a removed row back. Ticked files are the ones converted. Select All ticks or unticks them. The button says how many, such as "Convert 4 files to MP3".
Clear all removes every file from the Convert list. Nothing is deleted from the Mac, and Undo brings the list back. A recording you clear does not come back by itself. Send to Convert, on the Edit tab, adds that recording back.
Order is Oldest first (the default, so track 1 is the first one made), Newest, Name, or My order. Drag a row by its grip, or click the grip and use ↑ and ↓. Track numbers follow the order.
Save to is the folder for the new files. You are asked the first time. Estimated output shows the total size. Convert (⌘↩) shows progress on each row. Click again to cancel. When it is done, Show in Finder opens the new files. Channels for the new files are Stereo or Mono, whatever the original was.
Formats
| MP3 | Plays everywhere. It keeps ID3 tags, with cover art and chapters. 128 kbps Voice, 192 Standard, 256 High, or 320 Maximum. In the app, 128 is described for podcasts and spoken word, and 192 for everyday listening. |
|---|---|
| M4A (AAC) | The same sound in a smaller file, a good fit for Apple Podcasts. It keeps tags, cover, and chapters. 96 kbps Voice, 128 Standard, 192 High, or 256 Maximum. |
| WAV | Full quality, uncompressed, for archiving or for editing in other apps. 16-bit or 24-bit. Tags are an INFO list, plus an ID3 tag with the cover. Not every player reads tags in a WAV. |
| FLAC | Full quality in about half the space of WAV. Not every podcast app plays it. It keeps standard FLAC tags (Vorbis comments) and a front-cover picture. |
| iPhone ringtone | An .m4r file. Up to 40 seconds. A longer file becomes its first 30 seconds, with a gentle fade. The app explains how to put it on your iPhone. A ringtone does not get cover art. |
Tags and cover art
All files: artist, album, year, and genre, filled in once for every file. More adds album artist, disc, composer, grouping, publisher, copyright, and comment.
One file: title, track, BPM, and lyrics for the selected file.
Cover art: drop any image, HEIC included, or browse. It is squared, sized, and compressed. File › Choose Cover Art… is ⇧⌘O.
Remember these tags and cover for next time keeps them for the next session. MP3 keeps ID3 tags, with cover art and chapters. M4A keeps tags, cover art, and chapters. FLAC keeps standard FLAC tags (Vorbis comments) and a front-cover picture. WAV keeps an INFO tag list, plus an ID3 tag with the cover. Not every player reads tags in a WAV. An iPhone ringtone (.m4r) does not get cover art.
Reference
Files and privacy
The project's own WAV keeps everything you recorded, including the parts you cut, so an edit can always be undone. For a clean copy, use Save Finished WAV or Convert.
- Recordings, each project's own WAV: Music › QAudioStudio Recordings. Change it with Project audio is saved to, on the Record tab.
- Finished WAVs: the Finished folder inside the recordings folder.
- Projects, your edits, chapters, script, and transcript: Music › QAudioStudio Projects. Double-click a project file to open it.
- Converted files: the Save to folder you chose on the Convert tab.
- Transcripts and captions: wherever you save them. You are asked each time.
Recording, editing, noise cleanup, and transcripts all happen on your Mac. Nothing is uploaded. The Mac asks once for permission to use the microphone, and once for System Audio Recording the first time you record system audio or an app. Record what you have the right to use.
What you need
- Mac Apple silicon Macs only (M1 or later)
- macOS macOS 12 Monterey or later. A microphone or mixer records on macOS 12 or later
- System audio Full system audio, or audio from one app, needs macOS 14.2 or later
- Clean up noise macOS 13 Ventura or later
- Transcript macOS 26 Tahoe or later. The language model downloads once, the first time
Keyboard shortcuts
The same key can do a different job on a different tab. These are the keys in the app.
Everywhere
| ⌘N | New Project |
|---|---|
| ⌘L | All Projects |
| ⌘O | Add audio or video files on Convert. Open a file on Edit |
| ⇧⌘O | Choose cover art |
| ⌘↩ | Convert, on the Convert tab. Send to Convert, on the Edit tab |
| ⌘Z | Undo |
| ⇧⌘Z | Redo |
| ⌥⌘V | Show or hide the Smooth voice window |
| ⌘? | Open this guide (Help › QAudioStudio Help) |
Record tab
| R | Record |
|---|---|
| Space | Stop or start recording. Listen when the cursor is not at the end |
| S | Stop |
| M | Add a marker |
| X | Delete the last take |
| ⌫ | Delete the selection on the project's waveform |
| ⌘X ⌘C ⌘V | Cut, copy, paste on the project's waveform |
| ⌘+ ⌘− ⌘0 | Zoom in, zoom out, whole file |
Teleprompter
| ↑ ↓ | Scroll the script. Page Up and Page Down scroll too |
|---|---|
| ← → | Slower or faster, when Scroll is Auto |
| ⌘↩ | Done, when you are typing the script |
| Esc | Cancel, when you are typing the script |
| ⌘+ ⌘− | Text size, in the pop-out window |
Edit tab
| Space | Play or pause |
|---|---|
| ← → | Back or forward 5 seconds |
| ⌫ | Delete |
| T | Trim |
| S | Split |
| L | Loop |
| ⌘A | Select all |
| + − | Zoom in or out |
| ⌘+ ⌘− ⌘0 | Zoom in, zoom out, whole file |
| Return | Finish typing in the transcript |
| Esc | Cancel typing in the transcript |